Traeger grills are now a piece of cake in the markets. If we compare any type of food with Traeger Grill, it is high-tech, relying on multiple parts that work in combination to create a set and forget it. Barbecue Experience Traeger spreads grills and barbecues for cooking. The appliance is mainly used for roasting, smoking the barbecue. This comes with automatic start, electronic temperature control, etc. I'm going to talk about troubleshooting the Traeger 10 grill, bug / problem that includes the solution as well.

Like all pellet grills, the Traeger grill has some limitations and shortcomings. The grill does not catch fire, the granules do not melt in the fire pit, they crack with decreasing temperature. The whole problem can be solved using the troubleshooting guide.

The troubleshooting guide is provided below:

10 Troubleshooting the Traeger Grill – Problem and Solution

1. Unusual Heat Swing

The most common problem with the Traeger grill is its unusual heat swings. Sometimes it takes a long time to warm up. Depending on the outside temperature, the grill takes 5-10 minutes to heat up.

  Troubleshooting the Traeger Grill Guide

Solution

When you use your Traeger for the first time, it will take approximately 7 minutes. We all know that a perfectly cooked or smoked food depends on the right heat or temperature. It is quite annoying that when the set temperature begins to swing in your Traeger grill. You can treat it as a problem, but some oscillation is quite normal. According to Traeger, during your cooking you will experience the temperature hovering around 20 degrees.

If you turn on your grill in all seasons, then you can expect the temperature to oscillate beyond the 20 degree range. To solve this problem, you need to think about the wood pellets you are using. Are they perfect for Traeger pellets or are you storing them properly and so on? If the granules are fine, take a look at the fire pot and other parts to analyze its condition. You need to clean and replace the Traeger. If you see that everything is fine, but the temperature is still changing, it could be a temperature problem. Therefore, it is not a big problem for you to use the Traeger grill.

2. Mitigated Fire

Many users complain about Traeger for mitigating fire. This problem is almost the same as temperature changes. In the same way, you need to clean and replace the fire pot because it can't keep the fire going. A lot of ash or deterioration is needed inside the fire pot, which obstructs the air flow and causes the air to die.

Solution

The Traeger grill has an induction fan. This fan provides oxygen to continue your work and if you don't, the fire will be mitigated. If you notice any damage somewhere, you need to replace it.

For long life, clean grill after each use, Clean ash after two to three sessions, and thoroughly clean at least two to three times a year. If the fan is not working and the fire mitigation problem is not solved, you can choose different granules to use and store them properly to preserve their quality. Because the best quality pellets will ensure that the grill does not burn too much. So this problem can be solved by following this.

3. Pellets Don't Pass

You don't have to stand next to the grill and keep adding pellets constantly because the Traeger grill comes with an automated auger and hopper that can do the job for you. But many grill loving people face the problem that the granules do not move from the hopper to the fire pot.

  Traeger Grill Troubleshooting Guide

Solution

In this case, you need to take out your tool box and open a part of the grill, especially the hopper side. If you see the main problem is in the engine then you need to repair or replace it or if it is a jam you will just need to fix it. Then you need to assemble it and you can use the grill with joy.

You should explore the 7 best Traeger 2020 smokers reviews and comparison

4. The fire pot does not burn

The user of the Traeger grill claims that the fire does not burn in the pot. This could be happening for many reasons. Like-

  • The fire pot can't find blades to burn.
  • The lighter or the hot rod crashes.
  • Excessive ash

If the lighter is ok, then you should think that the fan is not working, that it is responsible for supplying oxygen to the fire.

Solution

If the lighter or the fan is blocked in this case, you should repair it if you can. If you can't do it, you can replace the hot rod with better stainless steel components that would be more durable.

5. Grill Does Not Light

Charcoal or gas grill does not require lighting, but the Traeger grill does. It is a common and simple problem for the user. Final components, like the induction fan and auger motor, need electricity to run and make your barbecue attractive.

Solution

This problem can be resolved by firmly installing or replacing the components that are creating the problem. Sometimes the grill does not need to turn on due to a tripped GFCI, a blown fuse, or a faulty power outlet.

You can explore 5 problems and solution of the Traeger auger motor

6. Grill Fan Does Not Turn On

It is a common problem that induction is not working. It happens for various reasons. Firstly, this can happen due to lack of power from the controller to the orange cables. Finally, similar obstructions can prevent the fan from spinning.

  Traeger Grill Troubleshooting Guide

Solution

The induction fan is the most essential components of the grill. If it doesn't work, you won't be able to do anything on your grill. If you notice that the fan is not working due to some obstructions, you can manually remove it and the fan should start again. In this way, the induction fan will do its job.

7. The grill is not smoking

It is a vital complaint about Traeger Grill that sometimes the grill is not smoking. The main purpose of a grill is to smoke. But when the grill stops smoking, it becomes a major problem.

Solution

High temperature is the main cause of smoking impediment. Wood pellets produce less smoke. In this case, you need to use hard wood pellets. Softwood pallets cannot produce smoke. You should check the smoke every three to five minutes.

8. Fire Goes Out Frequently

Another annoying problem with the Traeger grill is that the fire is going out in the middle of cooking. This problem is the root of many other problems like temperature changes, excessive ash, etc.

Solution

Unloading pallets are the main cause of this problem. Therefore, you need to keep the granules in the right place and precisely restore them. If you can avoid this then you could keep the fire going.

9. It takes too much to cook

The user complains about this model that it takes too long to cook. It happens because of many problems.

Solution

This problem is related to temperature changes and fire fighting. When the fire goes out in the middle of cooking, the temperature changes and it takes too long to cook.

10. Traeger error codes

Smoking grills will not produce an error code, but Traeger grills have added an error code to their design for specific problems.

Meaning of Traeger error code and find above solution for short circuit. Accident

  • LER- Low temperature error
  • HER- High temperature error
  • ER1- Loose connection in RTD.
  • ER2- Short Circuit
  • Final Verdict

    Like all Grill Traeger grills it also has some limitations or problems, otherwise it is a state of the art technology than charcoal or gas grill. Traeger Grills swing temperature? Does the fire go out? Induction fan not working? Don't be scared by this. Now you can solve your Traeger grill problem with this troubleshooting solution. So those who resist this problem can take a look in this overview. Hopefully, it will be a subsidiary for you in the use of Traeger Grill.

    Leave a Reply

    Your email address will not be published.